自動混凝土攪拌車的定期維護_行業資訊_自動混凝土攪拌機知識_自動混凝土攪拌機_自動混凝土攪拌車廠家

站內搜索

自動混凝土攪拌機知識

公司新聞行業資訊

熱點

水泥攪拌車的用車養車要注意哪些情況？

2020-09-10

自上料攪拌車篩網葉片出現故障需及時維修

2022-05-16

平口攪拌車配件怎么做防腐處理？

2021-06-07

如何提高混凝土攪拌機工作效率？

2021-04-10

關于山汽

聯系人：劉老師

電話：400-879-1999

公司：山東山汽工程機械（集團）有限公司

地址：山東省萊州市206國道與308省道交叉口東南50米

自動混凝土攪拌車的定期維護

所屬分類：行業資訊發布時間：2022-12-23 來源：http://www.akware.net/ 瀏覽量：0

定期維護自動混凝土攪拌車密封條：
Regularly maintain the sealing strip of automatic concrete mixer:
小型攪拌機門的自動加載以及焊接實際都是粘在密封條上，這也是保證密封的操作。不然，這些縫隙很簡單被外面的風沙沙粒填滿，引起腐蝕等。檢查小型攪拌機密封是否有大的裂縫。今天，我想與您分享密封條的日常維護。
The automatic loading and welding of the small mixer door are actually stuck to the sealing strip, which is also the operation to ensure the sealing. Otherwise, these gaps are simply filled with wind blown sand particles outside, causing corrosion, etc. Check the seal of the small mixer for large cracks. Today, I want to share with you the daily maintenance of the sealing strip.
1.查看自動混凝土攪拌車的密封件是否有大的裂縫。如果密封破損，可以使用粘合劑修正。特別是，在密封件上使用粘合劑能夠輕松填充較大的裂縫區域。當然，如果密封件嚴重損壞或老化程度很大，請替換新的密封件。
1. Check whether the seals of the automatic concrete mixer have large cracks. If the seal is broken, it can be corrected with adhesive. In particular, the use of adhesives on seals can easily fill large crack areas. Of course, if the seal is seriously damaged or greatly aged, please replace it with a new one.
2.在駕駛員用混凝土混合清潔劑清潔門窗密封條之后，應涂一層滲透防護劑，從而避免密封條老化，并明顯提高了密封條的密封作用。另外，密封條之間的空隙很容易充滿塵埃和銹蝕。為此，您需要使用刷子鏟除塵埃。
2. After the driver cleans the door and window sealing strip with concrete mixed detergent, a layer of penetration protective agent shall be applied to avoid the aging of the sealing strip and significantly improve the sealing effect of the sealing strip. In addition, the gap between the sealing strips is easily filled with dust and rust. To do this, you need to use a brush to remove the dust.
3.替換整個機身時，有必要在焊接部分的堆疊部分涂一層密封劑。粘合劑層的厚度約為1mm，而且粘合劑層必須沒有不適當的粘合，氣泡和其他缺點。地板的整個底面和前輪蓋的底面應涂3mm-4mm的彈性涂層和防腐涂層。這些措施不只明顯進步了車身的密封功用，減緩了車身的腐蝕速度，而且大大進步了乘坐舒適性。
3. When replacing the whole fuselage, it is necessary to apply a layer of sealant on the stacked part of the welding part. The thickness of the adhesive layer is about 1mm, and the adhesive layer must be free from improper adhesion, bubbles and other defects. The whole bottom surface of the floor and the bottom surface of the front wheel cover shall be coated with 3mm-4mm elastic coating and anti-corrosion coating. These measures not only significantly improve the sealing function of the body, slow down the corrosion rate of the body, but also greatly improve the ride comfort.

4.密封門和車身是一個相對困難的部分。密封要求相對嚴厲。需要密封的部分相對較長，要密封的部分的橫截面形狀不相同，而且門常常被翻開和關閉。在混凝土攪拌車上安裝三通四通密封墊，并在安裝前支柱和頂梁側梁的四密封結構。這種類型的多通道密封一般放置在前門之間的空隙中，除了具有密封功用外，還具有減少車輛噪音的效果。
4. Sealing door and body is a relatively difficult part. The sealing requirements are relatively strict. The part to be sealed is relatively long, the cross section shape of the part to be sealed is different, and the door is often opened and closed. Install the three-way and four-way sealing gasket on the concrete mixer truck, and install the four-way sealing structure of the front pillar and the top beam side beam. This type of multi-channel seal is generally placed in the gap between the front doors. In addition to its sealing function, it also has the effect of reducing vehicle noise.
以上就是為大家介紹的有關自動混凝土攪拌車的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.akware.net
The above is a detailed introduction to the automatic concrete mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.akware.net

上一頁：下一頁：這才是混凝土機械設備該有的樣子！

熱門產品 / HOT PRODUCT