自動攪拌車剎車異常怎么判斷?車輛行駛,是很重要的,專用車亦是如此,攪拌車是專用車的一種,主要是用來運輸混凝土的,在建筑工地使用較多。自動混凝土攪拌車的重 心較高,行駛范圍內的路況一般比較差,因此更要重視行車的,而剎車是自動混凝土攪拌車上使用較為頻繁的部件之一,剎車性能的好壞對整車的相當重要,駕駛攪拌車的司機一定要學會判斷剎車異常的技巧,不能等剎車失靈,那樣后果就嚴重了。下面給大家介紹一下哪些情況預示著剎車將要出現問題。
How to judge the abnormal brake of automatic concrete mixer? Vehicle driving, safety is very important, special vehicle is also so, mixer is a kind of special vehicle, mainly used to transport concrete, more used in construction sites. The center of gravity of the automatic concrete mixer is high, and the road condition within the driving range is generally poor. Therefore, more attention should be paid to the safety of driving. The brake is one of the frequently used parts of the automatic concrete mixer, and the brake performance is very important for the safety of the whole vehicle. The driver of the mixer must learn the skill of judging the abnormal brake, and can't wait for the brake failure, Then the consequences will be serious. Now let's talk about which conditions indicate that the brake will have problems.
1. 剎車異常要注意:自動混凝土攪拌車踩剎車時,剎車系統發出尖銳刺耳的金屬摩擦聲,這可能是因為剎車片變薄、剎車坑洼、剎車片中有異物或剎車盤生銹等導致,一般情況下多踩幾腳剎車異響都會有緩解。
1. Attention should be paid to the abnormal brake: when the automatic concrete mixer truck steps on the brake, the brake system makes a sharp metal friction sound, which may be caused by the thinning of the brake pad, the brake crater, the foreign matter in the brake pad or the rust of the brake disc, etc. generally, the abnormal brake sound will be alleviated by stepping on more feet.
2. 剎車踏板行程變長,就是我們常說的剎車變軟。剎車行程變長的原因主要是剎車系統中進入空氣、缺少剎車油,可能是存在泄漏、剎車片磨損嚴重等。
2. The brake pedal travel becomes longer, that is, the brake becomes soft. The main reasons for the longer brake stroke are air entering into the brake system, lack of brake oil, leakage, serious wear of brake pads, etc.
3. 剎車跑偏,剎車跑偏的現象一般出現的不多,主要體現在踩剎車時方向盤有明顯的向一側偏轉。導致這種現象的原因可能是剎車片偏磨、剎車分泵有問題等。
3. Brake deviation, the phenomenon of brake deviation is generally not much, mainly reflected in the obvious steering wheel deflection to one side when stepping on the brake. The causes of this phenomenon may be the eccentric wear of the brake pad and the problem of the brake cylinder.
4.剎車變硬,很多司機會碰到剎車變硬的問題,剎車變硬的主要原因是真空助力器故障導致剎車無助力、頻繁踩剎車后導致等造成。
4. The brake becomes hard. Many drivers will encounter the problem of brake becoming hard. The main reasons for brake becoming hard are the failure of vacuum booster, which leads to the brake not being assisted and frequently stepping on the brake.
5.攪拌車踩剎車時反彈,這種情況也比較常見,在踩下剎車時剎車踏板有反彈頂腳的現象,這種現象多是剎車盤、剎車片表面不平、鋼圈變形等導致的。以上這些只是剎車系統問題的一部分,在駕駛攪拌車的過程中,如果你感覺剎車不正常,一定不能大意,自己先停車查看原因,如果自己搞不定,就到維修站去維修,千萬不要拖延時間,否則能出現大問題就得不償失了。
5. It is common for the mixer truck to rebound when stepping on the brake. When stepping on the brake, the brake pedal will rebound and push the foot. This phenomenon is mostly caused by the uneven surface of the brake disc and brake pad, and the deformation of the steel ring. These are just part of the problem with the brake system. In the process of driving a mixer, if you feel that the brake is not normal, you must not be careless. You should stop to check the reason first. If you can't make up your mind, you should go to the maintenance station to repair it. Don't delay the time. Otherwise, the big problem will not be worth the loss.
感謝您的閱讀,希望以上內容對您有所幫助,如您想了解更多精彩內容請點擊我們的官網:
自動混凝土攪拌車。
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: automatic concrete mixer.